How to Hang a Chainsaw on a Wall – Storing a Chainsaw Vertically

Published Categorized as Chainsaw How To Guides, Lumber Journal

If you’re like the majority of people, maintaining your chainsaw is the first thing that comes to mind when you think of the tool. But with a little bit of knowledge, you can safely hang this strong tool securely without causing any harm.

In this article, we’ll provide all the relevant information on storing a chainsaw vertically, along with a step-by-step method on how to hang a chainsaw on a wall.

Table of Contents

Husqvarna Chainsaws – Information, Manuals, Service Locations

Can You Store a Chainsaw Vertically? Chainsaw Storage Ideas

Your chainsaws can definitely be stored vertically. However, I would advise against utilizing this technique unless you want to keep the items for a few months or more. There is a danger that the gasoline and bar and chain oil from your chainsaw power tools could seep out of the saw and run down the chainsaw bar when you store them vertically, usually hanging by the handle.

So, there are two ways you can prevent this. One way to prevent a saw from leaking is to empty the gasoline, bar and chain oil from it. Because of this, I suggest that you only do this when preserving something for an extended periods of time.

Alternatively, you could hang it and then “burp” the oil and fuel tanks when you return in a few days. These tanks will eventually experience a buildup of pressure, which is what causes the liquid to flow out. You may relieve this pressure and stop it from leaking out by burping the tank.

Simply twist the tanks open enough to allow the gases to escape to accomplish this. I suggest this for longer-term storage because you might drain the fluids before storing them. And there you have it—quick and simple vertical storage for your chainsaws!

How to Hang a Chainsaw on a Wall?

As any chainsaw owner is aware, chainsaws are incredibly useful instruments that can complete a range of tasks quickly. But when it comes time to store your chainsaw, the back of the shed is not the only place you may put it. Chainsaws must be stored safely to maintain their condition and avoid accidents. The ideal solution for chainsaw storage space is a wall-mounted chainsaw hanging hook.

This makes it simple to grab the chainsaw when you need it and keeps it off the ground, where it is more likely to sustain damage. Additionally, storing your chainsaw on chainsaw hooks prevents rusting of the chain and guarantees that the saw is always accessible.

Hang Chainsaw on Wall: How to Install a Chainsaw Wall Mount

Before you begin, you will need to gather a few materials:

  • A mounting bracket for your chainsaw
  • Screws or bolts that are appropriate for the wall you are mounting the saw on
  • A drill or screwdriver
  • A level
  • A tape measure or ruler

Step 1: Choose the Location for Your Mounting Bracket

The first step in hanging a chainsaw on a wall is choosing the location for your mounting bracket. You should choose a wall space that is easily accessible and not too high or low so that you can easily reach the saw when you need it.

Step 2: Measure and Mark the Mounting Bracket

Once you have chosen the location for your mounting bracket, use a tape measure or ruler to measure the distance between the mounting holes on the back of the bracket. Transfer these measurements to the wall, marking the spot where each screw or bolt will go.

Step 3: Install the Mounting Bracket

Next, you will need to install the mounting bracket on the wall. If you are using screws, you will need to pre-drill the holes in the wall using a drill and a drill bit that is the same size as the screws. If you are using bolts, you will need to use a wrench to tighten them into place.

Step 4: Check the Level and Make Any Adjustments

Before you hang the chainsaw on the wall, it is important to make sure that it is level. Use a level to ensure that the saw is straight and not tilted to one side. If it is not level, you will need to adjust the position of the mounting bracket or the chainsaw until it is straight.

Step 5: Hang the Chainsaw on the Wall

Once the chainsaw is securely attached to the mounting bracket and level, you can hang it on the wall. Carefully lift the saw and place it onto the bracket, making sure it is securely supported.

Step 7: Check the Chainsaw for Stability

After hanging the chainsaw on the wall, you should check it for stability. Gently shake the saw to make sure it is secure and does not wobble or move around. If it is unstable, you may need to adjust the mounting bracket or the chainsaw until it is secure.

By following these steps, you can safely and securely hang a chainsaw on a wall. It is important to take the time to do this correctly to prevent accidents and damage to the saw.

Tips for Hanging Chainsaws on Walls

Prevent Oil Leakage While Hanging Your Chainsaw

Storing your saw in a chainsaw holder with gasoline is a terrific idea if you just intend to do so for a few days or weeks. The next time you need your chainsaw, it will be fully charged and ready to go.

However, there’s a danger that your fuel tank will leak oil if you store it with the fuel level full. Release the fumes that have accumulated in the gasoline tank by burping it, which involves opening the tank to let the pressure out.

I advise storing it on or over cardboard to absorb liquids in case it leaks nonetheless, or putting it in a long Tupperware (or comparable) container.

Storing Without Fuel

It is advisable to empty the fuel tank if you intend to keep it for later use in order to prevent long-term harm. There are a few advantages to storing your chainsaw without fuel as well.

By storing them unfueled, you can avoid having any of your work surfaces contaminated by fuel leaks. Additionally, before using your saws, it’s rather simple to refill them. It is therefore suitable for both short-term and long-term storage.

Draining your saw of fuel before hanging it can stop any potential fuel leaks if you want to hang it in any way from the ground. When it comes to storing with or without gasoline, there is no right or wrong approach; it really just boils down to personal preference.

Keep Your Chainsaw Dry and Safe During Winter

It’s critical to take precautions to shield your chainsaw from the elements as the temperature drops. Make sure to hang your chainsaw in a dry, well-ventilated area if you intend to use it all winter.

Keep it hung inside your home or garage if you can. To keep it dry, cover it with a tarp or other similar material if you must hang it outside. Additionally, before each usage, you need to fill the tank with fresh gas after emptying it.

This will lessen the likelihood of moisture accumulating inside the engine and resulting in corrosion. Your chainsaw can last the entire winter with a little maintenance and planning. For more maintenance tips, visit our Chainsaw Bar Upkeep and Maintenance guide!

FAQs (Frequently Asked Questions)

What’s the best way to store a chainsaw?

Chainsaws should be kept in a dry location out of direct sunlight. Pick a location that is both well-ventilated and weatherproof. It is not suggested to keep it outside. The easiest method to safeguard your chainsaw is to put it in a case, which is what I would advise doing. Additionally, I would advise keeping it out of reach for kids when storing it.

Is it OK to store a chainsaw on its side?

A chainsaw shouldn’t be kept on its side. On the chainsaw’s left side are the apertures for the oil tank and fuel tank. In contrast, an oil hole on the opposite side enables oil to trickle onto the bar, keeping your chain oiled while you are using it. Storage of oil or fuel on either of these sides may cause leakage. As a result, it has a higher chance of leaking than if you simply set it on the ground. Your lightweight chainsaw can be stored on its side if necessary, but you should empty the oil reservoir (the fuel can stay in) and store it so that the bar is flat against the ground.

How do you store a chainsaw without oil leaking?

Keep the saw out of the way in a dry, secure location. The best approach is to empty the chainsaw of its bar oil and fuel mixture and store it empty to prevent oil leaks while it is in storage. You can help keep your chainsaw in good working order and stop oil leaks by adhering to these easy procedures.

By Dave Cross

Hi, I'm Dave. I’ve been sawing for more than 40 years. I feel most at home when I’m surrounded by nature and my saws, but occasionally, I’ll share some of my know-how and experience on Cross Saw Mill.

1 comment

  1. You know it has been said that a Picture is worth a thousand words. So I suggest a few pics – you know, to shorten the volume of reading. otherwise, it’s all GOOD.

Leave a comment

Your email address will not be published. Required fields are marked *